Hope Carbide Pro Hollowing Tool
Designed for an all round tool from boxes to deeper vessels. The end sleeve pulls off allowing the 16mm bar to fit into any HOPE
Hope Carbide Pro Tool Optional Hook Tip Holder
Optional hook tip for further reach when under cutting Fits into the 6mm pro on the Hope carbide cutting tools page and 16mm
12MM hook tool. 30% bigger size to the 10mm hook and designed for undercutting and hollow forms about 300-350mm deep with a medium handle fitted.
Designed to get into hollow forms for under cutting and cleaning up. The HSS 12mm tip is made from cryo HSS and keeps its edge for a long time. The tool comes with a torx key and round bar tip holder for sharpening the tip. Simply screw the tip on the holder and then sharpen in a battery drill on a diamond file. Avoid a grinder as this would shorten its life by grinding too much away.The end is machined to 12mm. This will fit into a quick release or grub screw handle of that size.Or it will fit into the hollowing rig with the 10mm collet. Available on the hollowing rig page.
10MM hook tool. 30% smaller size to the 12mm hook and designed for undercutting and hollow forms about 200mm deep with a small handle fitted.
Designed to get into hollow forms for under cutting and cleaning up. The HSS 10mm tip is made from cryo HSS and keeps its edge for a long time. The tool comes with a torx key and round bar tip holder for sharpening the tip. Simply screw the tip on the holder and then sharpen in a battery drill on a diamond file. Avoid a grinder as this would shorten its life by grinding too much away.The end is machined to 10mm. This will fit into a quick release or grub screw handle of that size.Or it will fit into the hollowing rig with the 10mm collet. Available on the hollowing rig page.
This 8mm heavy duty is similar in design to the 8mm straight but has a wider bar for extra stength and support and designed for bigger end grain work upto approx 280mm or 11" deep with a handle fitted.
The cutter is machined and set at 45 degree which is the perfect shear cutting angle. This gives an excellent finish from the tool at the same time as making the tool very user friendly!Tool length is 460mm or 18".The end is machined to 13mm. This will fit into a quick release or grub screw handle of that size.
6mm carbide on a 10mm stainless steel straight bar.Excellent tool for small boxes.Total length is 235mm or 9 1/4".Fits into small grub or small quick release head.Tool comes with 6mm carbide fitted and torx key.
6mm carbide on a 10mm stainless steel hook bar.Excellent tool for small boxes and hollow forms.Total length is 215mm or 8 1/2".Fits into small grub or small quick release head.Tool comes with 6mm carbide tip fitted and torx key.