NEW MK 2 THREADING JIG IS NOW SOLD AS STANDARD. THE NEW JIG HAS A BUILT-IN HINGE PLATE AND IMPROVED PERFORMANCE. PLEASE CHECK THE 65MM MINIMUM MEASUREMENT NEEDED AS PER PICTURE IN IMAGES.
INCLUDES 16MM CUTTER
ABOUT THE HOPE THREADING JIG:
Its called the easy-set threading jig because the depth cut is done by twisting the outer (silver round handle) clockwise to push the main body into the cut. The handle has an internal click system so 9 twist clicks give you the depth for the 12 TPI , 7 twist clicks gives you the depth for the 14 TPI, 5 twist clicks gives you the depth for the 16 tpi and 3 twist clicks give to the depth for the 20 tpi. The handle on the back gives a 6" swing so you can rotate under control easily.
The 20, 16 ,14 and 12 tpi parts are machined with the front thread out of one piece. This gives ultimate accuracy, unlike systems where the thread adapters have to be attached to a common holder.
The jig comes with 1" stem as standard. but 16 mm, 19 mm, 25mm and 30 mm stems are also available, let me know your toolpost diameter and i'll swap it to suit your lathe.
THREADS NOW AVAILABLE TO ORDER ARE:
- 3/4 X 16 TPI 16 and 12 tpi
- 1" x 8" TPI 16 and 12 tpi
- M30 x 3.5 16 and 12 tpi
- M33 x 3.5 full range
- 1 1/14 x 8 full range
- 1 1/2 x 6 tpi, 16 and 12 tpi