Wax Polish Black Bison
Gives good resistance to finger and water marks Ideal for small surfaces
Feeds, polishes and helps prevent wood drying out
Highly lustrous and hard wearing Helps cover marks and scratches
EN7I Part 3 Approved - Safe for toys Approved by the Guild of Master Craftsmen
Silicone Free
Liberon Wax Polish Black Bison is ideal for nourishing and protecting all types of wood, including lacquers and French polishes. Black Bison is well known for its quality and distinctive, pleasant smell. It is traditionally used on antiques but is also suitable for use on modern furniture and will enhance the natural beauty of wood whilst protecting it against dryness.
Preparation
Remove old waxes and dirt with Liberon Wax and Polish Remover if necessary.
Application
Apply Wax Polish Black Bison sparingly with a cloth on a delicate / French polished surface or with Ultra Fine steel wool (Liberon grade 0000) when a deeper penetration is required.
Allow to dry for 20 minutes, or until touch dry, and then buff with a clean cotton cloth or furniture brush. Repeat the operation on new or very dry wood as it may require two or more coats. For a better finish, buff with the Liberon Furniture Brush once the last coat has dried.
For a higher sheen build-up with thin coats of wax, buffing between coats.
Important: Always test product on a spare surface or inconspicuous area for colour, compatibility and end result.
Cleaning and maintenance
Wipe over with a cloth or duster and re-wax as required when the surface looks dull and tired. Do not wash with water.
Colours: Clear.
Antique Pine, Dark Oak, Georgian Mahogany, Golden Pine, Maple, Medium Mahogany, Medium Oak, Neutral, Stripped Pine, Tudor Oak, Teak, Victorian Mahogany, Walnut and Yew are available in 150 ml, 500 ml and 5 L containers to order.
Health and Safety
Flammable. Repeated exposure may cause skin dryness or cracking. Keep out of the reach of children. Do not empty into drains. Use only in well-ventilated areas. If swallowed, do not induce vomiting: seek medical advice immediately and show this container or label
Verdigris Wax
-
Special effects wax
-
Ideal for decorating household objects
-
Suitable for use on wood, plaster, stone, metals and plastic
-
Easy to use
-
Buffs to a soft sheen
-
Product use
COVERAGE 250 ml 2-3 m2
APPLICATION Cloth or Steel Wool
DRYING TIME 5 minutes
TOOL CLEANING White Spirit
Liberon Verdigris Wax is a multi-purpose coloured wax for creating striking effects on all types of material such as metal, wood and plaster. It gives green hues of oxidised copper and brass and can be worked into moulding, bronzes, papier maché, alabaster and carvings. It can also be applied as a wax finish to bare or coloured wood.
Preparation
Ensure the surface is clean, dry and free from any previous finishes.
Application
Work a small amount into mouldings, or where required, using a brush or cloth. Allow to dry for 2-3 minutes before removing as much or as little of the excess as you wish with a clean lint-free cloth or Liberon Ultra Fine Steel Wool (0000).
To use the wax as a coloured finish on bare wood, work a thin coat into the wood with Ultra Fine Steel Wool (0000), allow to dry and buff. The wax may be thinned with a small amount of white spirit to make application on bare timber easier.
Once dry seal the wax with Liberon White Polish.
To remove large areas of Special Effect Wax use Liberon Wax Polish Black Bison Neutral or Liberon Finishing Oil on a lint-free cloth or steel wool.
Important: Always test product on a spare surface or inconspicuous area for colour, compatibility and end result.
Heath and Safety
Harmful. Flammable. May cause sensitisation by skin contact. Repeated exposure may cause skin dryness or cracking. Keep out of the reach of children. Avoid contact with skin. Do not empty into drains. Wear suitable gloves. Use only in well-ventilated areas. If swallowed, do not induce vomiting: seek medical advice immediately and show this container of label. Contains silice, suitable respiratory equipment is recommended when using sand paper on dry surfaces.
Black Patinating Wax
-
Special effects wax
-
Ages modern furniture
-
Disguises repairs to old and new furniture
-
Fakes grime on picture frame
-
Suitable for use on wood, metal, gilt,
plaster, tone, MDF and papier maché
-
Product use
COVERAGE 250 ml 2-3 m2
APPLICATION Brush, Cloth or Steel Wool
DRYING TIME 5 minutes
TOOL CLEANING White Spirit
Liberon Black Patinating Wax creates striking effects on all types of material such as metal, wood and plaster. It is ideal for ageing modern furniture and disguising repairs to old and new furniture. It can also be used for adding a coloured finish or highlighting areas on finished pieces such as carvings.
Preparation
Ensure the surface is clean, dry and free from any previous finishing materials.
Application
Wipe onto the surface with a cloth or brush and allow to dry for 2-3 minutes before removing as much or as little of the excess as you wish with a clean lint-free cloth or Liberon Ultra Fine Steel Wool (0000).
To use the wax as a coloured finish on bare wood, work a thin coat into the wood with Ultra Fine Steel Wool (0000), allow to become touch dry and buff.
Once dry the wax may be sealed with Liberon White Polish.
To remove large areas of Special Effect Wax use Liberon Wax Polish Black Bison Neutral and buff. For a water resistant finish use Liberon Finishing Oil applied with a lint-free cloth or Ultra Fine Steel Wool (0000).
Important: Always test product on a spare surface or inconspicuous area for colour compatibility and end result.
Colour Jet Black
Heath and Safety
Harmful. Flammable. May cause sensitisation by skin contact. Repeated exposure may cause skin dryness or cracking. Keep out of the reach of children. Avoid contact with skin. Do not empty into drains. Wear suitable gloves. Use only in well-ventilated areas. If swallowed, do not induce vomiting: seek medical advice immediately and show this container of label. Contains silice, suitable respiratory equipment is recommended when using sand paper on dry surfaces.
Gilt Cream
-
Use to retouch damaged gilding or to gild new surfaces
-
Easy to use
-
All colours are intermixable
Product use
Liberon Gilt Cream is an easy to apply gilt finish for restoring old gilding work and for giving a gilt finish to new surfaces.
Preparation
Seal porous surfaces, such as woods and plaster, with Liberon Fontenay Base before applying Liberon Gilt Cream. Ensure surface is clean, dry and free from dust.
Application
Apply to the surface with a cotton cloth or small brush for intricate areas. Allow to dry for a minimum of 4 hours, longer is possible and either leave matt or buff to a shine. For a better finish we recommend applying several thin coats of Gilt Cream as oppose to one thick coat.
Clean tools in white spirit.
Important: Always test product on a spare surface or inconspicuous area for colour, compatibility and end result.
Precautions
Gilt Creams may be reactivated or thinned with turpentine or good quality white spirit. Colours: Chantilly, Compeigne, Rambouillet, St Germain, Trianon and Versailles.
Heath and Safety
Flammable. Repeated exposure may cause skin dryness or cracking. Keep out of the reach of children. Do not empty into drains. Use only in well-ventilated areas. If swallowed, do not induce vomiting: seek medical advice and show this container or label. Contains a honey perfume. May cause an allergic reaction.
-
Gilt Varnish
• Use to gild new surfaces• Recommended for fine detail gilding • All colours are intermixable
Product use
Liberon Gilt Varnish is an easy to apply gilt finish that is suitable for use on wood, pottery, metal and plaster.
Preparation
Seal porous surfaces, such as woods, with Liberon Fontenay Base before applying Liberon Gilt Varnish. Ensure surface is clean, dry and free from dust.
Application
Stir thoroughly and brush onto the surface. Allow to dry for a minimum of 3 hours before applying further coats.
Clean brushes in white spirit.
Important: Always test product on a spare surface or inconspicuous area for colour, compatibility and end result.
Colours: Chantilly, St Germaine
Compeigne, Rambouillet, Trianon and Versailles to order Heath and Safety
Flammable. Repeated exposure may cause skin dryness or cracking. Keep out of the reach of children. Do not empty into drains. Use only in well-ventilated areas. If swallowed, do not induce vomiting: seek medical advice and show this container or label.
EASY FRENCH POLISH
Using a good quality brush or cloth apply a thin coat of Easy French Polish. Work with the grain of the wood and avoid overlapping between strokes. Allow a drying time of three to four hours between coats. Gently rub down the dried coat using extra fine abrasive paper or Ultra Fine Steel Wool (Grade 0000) for a smooth surface. Use a tack cloth to remove any dust. Apply as many coats as necessary, following the same instructions. Three to four coats are usually sufficient to achieve a quality finish.
PURE TUNG OIL
Liberon Pure Tung Oil is highly resistant to water, alcohol and food acids. Providing a hardwearing finish, it is ideal for surfaces such as kitchen worktops, tables and all high quality interior wood. Pure Tung Oil, with no added dryers, is a natural, non-toxic product which can be used on toys and objects in contact with food such as salad bowls etc. Recommended for use on exterior oak.
Performance:
- Premium, pure and natural oil for wood care;
- Ideal for use on food contact surfaces - kitchen worktops, chopping boards and salad bowls;
- Provides a long lasting matt finish;
- Water, heat and alcohol resistant;
- EN 71 approved - safe for toys;
- Suitable for interior and exterior use;
- Recommended for use on external oak.Application:
Ready to use. Apply Tung Oil using a brush or lint-free cotton cloth. For ease of application dilute the first one or two coats with up to 50% white spirit. Allow the oil to penetrate for 20 to 30 minutes then wipe off the excess oil using a clean lint-free cloth. Allow to dry for 24 hours between coats.Apply further coats of Tung Oil as above, reducing the amount of white spirit used with subsequent coats. Again allow 24 hours to dry.
Apply the last one or two coats of Tung Oil undiluted, as in previous applications. After the final coat has been applied and the excess removed leave for 24 hours and wipe over again to aid drying and remove any oil that may have surfaced. We recommend a minimum of 4 coats; more coats will be required for porous or external surfaces. For best results gently rub with Liberon Ultra Fine Steel Wool (0000) between coats.
Coverage: Approx. 10-12m² per litre.
Drying time: 24 hours between coats, 4 days finalTEAK OIL
The Liberon Teak Oil is a blend of pure tung oil and linseed oil which nourishes and enhances the natural beauty of hard/exotic woods, including teak and iroko. With added UV filters for protection against fading from sunlight Teak Oil is suitable for interior and exterior use. Achieving the traditional cabinet makers finish on hardwoods, Teak Oil produces a hard-wearing satin finish.
Performance:
- Blend of pure Tung Oil and linseed oil
- Nourishes and enhances the natural beauty of hard exotic / oily woods
- Added UV filters minimise fading from sunlight
- Finishes and protects interior and exterior woodwork
- Ideal for use on garden furniture
- EN 71 Approved- safe for toys
- Usage: Interior and exteriorSpecification
Coverage: 10-12m² per litre.
Drying Time: 24 hours.BOILED LINSEED OIL
Liberon Boiled Linseed Oil is used to give a mellow, patinated finish to new or stripped bare wood. A superior quality oil, similar to Raw Linseed, but having had hot air passed through to improve drying times, it is suitable for use on all types of wood, except exterior oak. It is also recommended as a sealer for terracotta tiles and other porous surfaces before waxing.
Performance
- Superior quality oil, similar to Raw Linseed, but has had hot air passed through to improve drying times.
- Ideal for use with all types of wood (except exterior oak).
- Provides a traditional hardwearing finish.
- Traditional sealer for terracotta and stone floors.
- Usage: interiorCoverage: 1 L = 8 - 10 m².
Drying time: 5 hours.
Usage: Interior.
-
-